Homepage
Tutoring Jobs
Plymouth 
Plymouth 
£25/h
1st lesson free!
Profile and degree verified
Response Time 24h
Lessons offered by Chukwunonyelum Emmanuel
  • Individual
  • In group
The lessons will be held
  • At the tutor's house
  • at your home
  • By webcam
Taught subjects
  • Mechanical Engineering
  • Engineering
  • Technology
  • Automation
  • Industrial design
  • Metallurgy
Levels
  • All Levels

Enthusiastic engineering lecturer offering maths, physics and mechanical engineering lessons in Plymouth

Methodology

As a constructivist, I believe that learning is a sense-making process which consists of the period of confusion, tussle and resolution of difficulties. Also I do not assume that my well-defined and detailed description (both verbal and written), communicated to my students my intention. This is the reason why I use high level questioning style to find-out their understanding of what they think I meant. Another point is that I believe that a direct explanation is hardly grasped, understood and applied when needed. This is because productive learning takes place within the period of challenges that students can advance when adequately supported. With this, I continually support students and modify my communication and teaching approaches to suit the students’ learning styles which evolve with time. Another important way that I communicate complex information with clarity is by finding-out my students’ pre-existing knowledge about a subject and follow-up its evolution.

Background

Innovative Manufacturing and Mechanical Engineer with over 20 years of experience in both educational and industrial sectors. A highly skilled expert in complex teaching, problem solving, leadership, project management, decision making and system simulation skills excelling at operations and control strategy analysis. Skills and expertise include (but not limited to):
• People Management
• Leadership and Negotiation
• Interpersonal Conflict Resolution skills
• Failure Mode & Effect Analysis
• Mechanical/Manufacturing Engineering
• Judgment & Decision Making
• Production Control Strategy
• Continuous & Process Improvement
• Project Management
• Time Management
• Lean Manufacturing & Quality Assurance
• Simulation and automation
• Excellent Oral and Written Communication skills
• Detail-oriented

Rates

Transportation Fee : £5
Rate for online lessons : £25/h
Rate for 5 hours of lessons : £22
Rate for 10 hours of lessons : £20

Details

14 days cancellation notice is required prior to a scheduled lesson, otherwise you will be charged £5 cancellation fee. Also, failure to attend is charged as 100%.

Lessons offered by Chukwunonyelum Emmanuel
Individual
In group
The lessons will be held
At the tutor's house
at your home
webcam
Taught subjects
  • Mechanical Engineering
  • Engineering
  • Technology
  • Automation
  • Industrial design
  • Metallurgy
Levels
  • All Levels

Chukwunonyelum Emmanuel's CV

Chukwunonyelum Emmanuel Onyeocha, PhD


PERSONAL DETAILS

ADDRESS 20 Cunningham Road,
Tamerton Foliot, Plymouth, PL5 4PS.
Tel. +44 (0)(concealed information)
Email: (concealed information)


1. ACADEMIC QUALIFICATIONS
2011-2014 Ph.D. in Mechanical Engineering, Dublin City University
2009-2011 MSc in Computer Aided Manufacturing and Mechanical Engineering, Dublin City University
2006-2007 Level 6 in Mechatronics/Industrial Automation Engineering, FAS Training Centre, Dublin 7
1994-1999 BEng. in Mechanical Engineering, University of Agriculture, Makurdi

2. MEMBERSHIP OF PROFESSIONAL INSTITUTIONS
Institute of Engineers Ireland Member, October 2010.
American Production & Inventory Control Society Member, 2016.


3. CURRENT EMPLOYMENT
September 2017- January 2018:
HE Lecturer in Mechanical Engineering
Faculty of Technology, Engineering & Construction, Weston College

As a HE lecturer, I was responsible for developing and delivering work-based and higher education programmes in-line with the University of West England academic standards and promoting research in the college. Also, assessing, tracking and reporting learners' progress. This role includes: providing students with mechanical & manufacturing engineering knowledge, skills and ability to develop, simulate, analyse and proffer solutions to various engineering system problems. Delivering of lectures for MATLAB, Fluid Dynamics, Engineering Materials, Further Mechanical Principles, Mechanics of Machines & Thermodynamics courses


4. EMPLOYMENT HISTORY
2016-2017: City College Plymouth, Kings Road, Plymouth (via staffing firm).
HE Engineering Lecturer:
• Provide students with mechanical & manufacturing engineering knowledge, skills and ability to develop, simulate, analyse and proffer solutions to various engineering system problems
• Prepared the lesson materials/notes for the classes and assess, track and report learners' progress.
• Teaching mechanical engineering students (Foundation Degree, HND, HNC and BTEC)


2016-2017: Prospect College of Advanced Technology, Crompton Close, Basildon
Mechanical Engineering Lecturer:
• Provide students with mechanical & manufacturing engineering knowledge, skills and ability to develop, simulate, analyse and proffer solutions to various engineering system problems
• Prepared the lesson materials/notes for the classes and assess, track and report learners' progress. • Teaching mechanical engineering students (BTEC, HNC and HND)

2014-2016: Methode Electronics Malta Limited, Mriehel Industrial Estate, Mriehel, Malta.
Senior Technical Specialist: Operations Research & Reliability Engineering:
• Supervise operations and research ways for continuous improvement & productivity
• Teaching & developing simulation models for automotive electronics components manufacturing using the software package such as ExtendSim & Simul 8
• Design and analyse 3D models developed via SolidWorks & ProE for Rapid Prototyping
• Design flexible experimentation tools that allowed the users to define levels for a predefined set of operational parameters (e.g. Maximum transfer lot size, maximum buffer size) to determine the effects of various operating decisions and performance metrics (e.g. Inventory, backorders).
• Supervise the quality control analysis and advise senior management

2011-2014: Dublin City University, Glasnevin, Dublin 9, Ireland.
Tutor & Demonstrator: Mechanical & Manufacturing Engineering
• Provided students (Undergraduate & Masters Class) with mechanical & manufacturing engineering knowledge, skills and ability to develop, simulate, analyse and proffer solutions to various engineering system problems via lean and six sigma techniques
• Provided students (Undergraduate & Masters Class) with operations research methods knowledge, skills and ability to solve complex problems
• Prepared the lesson materials/notes for the classes
• Presented workshops and research-findings for Irish Manufacturing Research (IMR) clients

2007-2011: Stream Global Services, Woodford Business Park, Santry, Dublin 17, Ireland.
Team Leader & Supervisor: Fault Handling Systems (FHS)
• Supervised fault handling team and resolve technical support faults using fault handling system software
• Planned and optimised personnel and tasks scheduling
• Monitor & report outages and perform root cause analysis for an adequate solution
• Providing feedback and ideas for process improvement

2001-2005: ExxonMobil, Mobil Producing Nigeria Unlimited, QIT, Akwa Ibom, Nigeria.
Mechanical Engineer
• Perform safety check on all QIT crude transfer pipelines including valve, tanks, and pumps
• Evaluate the pigging of the crude pipelines
• Advise the maintenance team on process improvement

1994-2001: Colgate Palmolive & International Equitable Association, Aba, Nigeria.
Apprenticeships & Student Engineer
• B.Eng. Title: Effect of Copper (Cu) Additives on the Structure, Properties & Heat Treatment of Aluminium (this company sponsored my undergraduate study).
• Assisted researches for innovative manufacturing of cosmetics and housewares products
• Developed an Al-Cu alloy with improved mechanical and corrosion properties.
• The alloy was used in revamping and fabrication of the feed lines and centrifugal pump parts in all corrosive and chemical lines
• Results of the experimentation process demonstrated that the alloy would last longer than steel under same conditions and its implementation would reduce maintenance cost to 15%
• A capital investment was secured for the facility on the basis of the experimental evidence


5. SUMMARY OF PUBLICATIONS (list in Publications section)

Journal publications 6
Refereed Conf. proceedings + Book chapters 5
Company Working Papers 4


6. SUMMARY OF RESEARCH AWARDS and GRANTS (list in the award section)

Principal Investigator: Methode Electronics Inc. € 50,000 (1 grant)
Principal Investigator: Higher Education Ireland € 42,000 (1 grant)


7. TRAINING TRAINERS & SHORT COURSES
2017: Safeguarding Children and Vulnerable Adults (The Royal Society for Prevention of Accidents Certificate)
2017: Prevent for practitioners (The Education and Training Foundation Certificate)
2017: Manual Handling (The Royal Society for Prevention of Accidents Certificate)
2017: Equality and Diversity Training (Weston College & DisabledGo Certificate)
2017: Equality and Diversity Managers (Weston College & DisabledGo Certificate)
2017: Disability Equality Training (Weston College & DisabledGo Certificate)
2017: DSE Interactive (The Royal Society for Prevention of Accidents Certificate)
2016: Leadership (Engineers Ireland Certificates)
2016: Negotiation (Engineers Ireland Certificates)
2014: Lean & Continuous Improvement (Methode Electronics Inc. Certificate)
2012-2013: Tutoring and Demonstration (University Certificate)
2012-2013: Research & Teaching Ethics (University Certificate)
2006: Community Development (CCP Certificate)
2006: Facilitation Skill (MEITHEAL Certificate)

8. MISCELLANEOUS

2017-Date: Coordinator Children Department, The Redeemed Christian Church of God, Plymouth
2015-2016: Evangelist and Facilitator-The Redeemed Evangelical Mission (TREM), Sligo.
2009-2015: Evangelist & Sunday school teacher-The Royal Household of Faith, Dublin
2005-2009: Basic Christian Facilitator-The Charismatic group, Blessed Sacrament Chapel, Dublin 1
2003-2005: Basic Christian Facilitator- SS Mulumba and David Catholic Church, Lagos.


Publications
Journal Papers

[1] Onyeocha, C.E., Khoury, J. & Harik, R.F. (2014) “Evaluation of forecasting and inventory control in multi- product manufacturing systems operating under erratic demand: a case study in the automotive domain”, Computer Science and Applications, 1(1), 31-47

[2] Onyeocha, C.E. (2014) “An Investigation of Pull Control Strategies and Production Authorisation Cards in a Multi-product Plant in the Presence of Environmental Variability”, Computer Science and Applications, 1(2), 67-84.

[3] Onyeocha, C.E., Khoury, J. & Geraghty, J. (2015), “Evaluation of pull control strategies and production authorisation card policies recovery period in a multi-product system”, P.Cortes et al. (eds), Enhancing Synergies in a Collaborative Environment, Lecture Notes in Management and Industrial Engineering, Springer International Publishing, Switzerland.

[4] Onyeocha, C.E., Khoury, J. & Geraghty, J. (2015), “Evaluation of Multi-product Lean Manufacturing Systems with Setup and Erratic Demand”, Computers & Industrial Engineering, 87, 465-480.

[5] Onyeocha, C.E., Khoury, J. & Geraghty, J. (2015), “Robustness analysis of pull strategies in multi-product systems”, Journal of Industrial Engineering and Management, 8(4), 11-25.
[6] Onyeocha, C.E., Wang, J., Khoury, J. & Geraghty, J. (2015), “A comparison of HK- CONWIP and BK-CONWIP control strategies in a multi-product manufacturing system” Operations Research Perspectives, 2, 137–149.

Conferences
[1] Onyeocha, C.E. & Geraghty, J. (2012), “A modification of the Hybrid Kanban-CONWIP production control strategy for multi-product manufacturing systems”, Proceedings of the 29th International Manufacturing Conference (IMC-29), August 2012, University of Ulster, Belfast, United Kingdom
[2] Onyeocha, C.E., Khoury, J. & Geraghty, J. (2013), “A comparison of Kanban-like control strategies in a multi-product manufacturing system under erratic demand”, In R. Pasupathy, S.-H. Kim, A. Tolk, R. Hill, and M. E. Kuhl, (Eds.), Proceedings of the 2013 Conference on Winter Simulation, December 2013, Vol. 1. IEEE (pp. 2730-2741). Washington DC, USA
[3] Onyeocha, C.E., Khoury, J. & Geraghty, J. (2013), “Evaluation of the effect of erratic demand on multi- product Basestock Kanban-CONWIP strategy”, Proceedings of the IXth Conference on Stochastic Models of Manufacturing and Service Operations (SMMSO, pp.147-155), May 2013, Kloster, Seeon, Germany
[4] Onyeocha, C.E., Khoury, J. & Geraghty, J. (2014) “Evaluation of Pull Control Strategies and Production Authorisation Card Policies Recovery Period in a Multi-Product System” proceedings of the 8th International Conference on Industrial Engineering and Industrial Management, CIO2014-23-25 July, Malaga, Spain.

Company Working Papers
[1] Onyeocha, C.E. and Geraghty, J.(2013), “Evaluation of Push and Pull PCS on Ford C170 Ignition Start Assembly Plant under Erratic Demand variability” Methode Electronics Malta Limited, Company Presentation, Mriehel, Malta.
[2] Onyeocha, C.E. and Geraghty, J.(2014),”Innovative Operations Research Techniques to Increase Productivity of ” Methode Electronics Malta Limited, Company Presentation, Mriehel, Malta.
[3] Onyeocha, C.E. & Khoury, J. (2015), “A modification of Hetronic Malta: Production System
& Planning via MRP ”, Methode Electronics Malta Limited, Company Presentation, Mriehel, Malta.
[4] Onyeocha, C.E. & Khoury, J. (2016), “An Investigation of the demand variability on the Alfa 952 EMCM Knob with / without touchpad-project Giorgio”, Methode Electronics Malta Limited, Company Presentation, Mriehel, Malta.


Grants and Awards
[1] 2011-14 Dublin City Council, Office of Higher Education, Research and Development, €42,000. “Innovative Manufacturing and Control Strategies” (Principal Investigator).

[2] 2012-15 Methode Electronics Inc., €50,000 “BKCONWIP” Base stock Kanban CONWIP production control strategy” (Principal Investigator).











Similar tutors

mechanical engineering lessons closeby? Here's a selection of tutor listings that you can check out.
Superprof can also suggest engineering lessons to help you.
Learning isn't a problem, technology lessons for all!
Taking automation lessons has never been easier: you're going to learn new skills.

Puteaux, France
IT engineer (Data Scientist) & scientific subjects' teacher/tutor (Maths, physics, chemistry and many other subjects) in addition to learning mental tools
£50
Adil
  • (37 reviews)
1st lesson free!

French below. Thanks for visiting my page. I am a Data Scientist working currently for a French leader of Data in...

Lessons by webcam Face to face lessons Approved profile
Greater london
Emma - Greater London - Technology
£50
Emma
  • (4 reviews)

Arty Classes was set up for worldwide students studying in art, fashion and textiles. Invest in a creative 'Super Tutor'...

Lessons by webcam Face to face lessons Approved profile
Liverpool
An experienced software engineer is offering to teach software methodologies and unified modelling language
£28
Aisvarya
  • (4 reviews)
1st lesson free!

Based on the student knowledge, my teaching pattern changes to ensure that student is not at all disadvantaged because they...

Lessons by webcam Face to face lessons Approved profile
Birmingham
A master's degree holder in software engineering is offering to conduct training on various software engineering techniques
£28
Adeyemi
  • (4 reviews)
1st lesson free!

My tutoring experience covers A-level to Masters Level courses. I am highly adaptable in my tutoring approach. I make...

Lessons by webcam Face to face lessons Approved profile Responds within an hour
Huddersfield
An Experienced Software and Automation Tutor is willing to help with Software Engineering and Automation Task
£30
Adenike
  • (4 reviews)
1st lesson free!

My tutoring experience covers A-level to Masters Level courses in computer science, medical and health science. My tutoring...

Lessons by webcam Face to face lessons Approved profile
Jette, Belgium
Civil Engineer course gives Math Science ● ● ● Computer Physics home on Brussels
£25
Bach
  • (24 reviews)
1st lesson free!

● Secondary: During my high school curriculum, in the renowned Royal Athenaeum Jean Absil, I always excelled in...

Lessons by webcam Face to face lessons Approved profile
Épagny, France
In applied physics engineering gives Math, Physics, Chemistry and Engineering Sciences.
£37
Benjamin
  • (55 reviews)
1st lesson free!

Hello, Physics Engineer applied to Annecy-le-Vieux and former student of preparatory classes for schools physical specialty...

Lessons by webcam Face to face lessons Approved profile
Rixensart, Belgium
Tuto of Mathematiques and science primary level to higher education on Louvain-La-Neuve and around. Master in Engineering, 7 years of experience to teach, have a car for displacements.
£62
Brice
  • (13 reviews)

-Civil Engineer at Louvain-La-Neuve (in applied physics). -I Have a car available, so I can move to give lessons at...

Lessons by webcam Face to face lessons Approved profile Responds within an hour
Charleroi, Belgium
Electrical and electronics Industrial Engineer with 25 years experience
£17
José FR/EN/NL/SP/IT/PT
  • (52 reviews)

I am an electrical engineer and industrial electronics with 25 years experience. I work as a teacher for the morning. I can...

Lessons by webcam Face to face lessons Approved profile
Eccles
Electromechanical Engineer offering Maths, Computer Aided Engineering Design, Physics and Electronics courses in Manchester and surrounding boroughs.
£45
Firew
  • (3 reviews)
1st lesson free!

Teach and train practically the fundamental principles governing the major concepts in the field of mechanical and...

Lessons by webcam Face to face lessons Approved profile Responds within an hour
Hemel Hempstead
Lydia - Hemel Hempstead - Technology
£45
Lydia
  • (3 reviews)

Designer, Art Director & Photographer with 20 years experience working for several household brands, & approx 15 years...

Lessons by webcam Face to face lessons Approved profile
Oxford
Dr T - Carfax - Engineering
£50
Dr Parikh
  • (5 reviews)

PhD qualified highly experienced tutor and examiner. I have got many books and all the past exam papers. Most of my students...

Lessons by webcam Face to face lessons Approved profile
Swansea
A software engineer with over 5 years of experience is willing to teach software development and various types of automation
£30
Thanushan
  • (4 reviews)
1st lesson free!

I teach various categories of computer science-related modules spanning from GCSE to Masters’ level computer science...

Lessons by webcam Face to face lessons Approved profile
Belfast
Experienced software and engineering automation engineer is willing to teach software design methodologies and engineering automation.
£25
Aisvaran
  • (4 reviews)
1st lesson free!

I try to make the student understand the content on a high level. After then, I delve into the content in greater details...

Lessons by webcam Face to face lessons Approved profile
Manchester
An Aeronautics and Mechanical Engineering graduate is offering to teach graduate and postgraduate level courses
£30
Aisvaran
  • (4 reviews)
1st lesson free!

I try to make the student understand the content on a high level. After then, I delve into the content in greater details...

Lessons by webcam Face to face lessons Approved profile
High Wycombe
Cambridge University engineering graduate offering online Mechanical Engineering lessons for undergraduates in 1st and 2nd Year.
£13
Farzana
  • (3 reviews)
1st lesson free!

I teach Mechanical Engineering and Engineering Maths to engineering undergraduates in their first and second years. Topics...

Lessons by webcam Approved profile
Caulfield North, Australia
Embedded, Robotics, IoT, Arduino, python programming with hardware and software provision for passionate Higher and Bachelor degree Students at Melbourne
£21
HARDIKKUMAR
  • (5 reviews)
1st lesson free!

My teaching method is experimental. I am covering 10% theory and 90% practicle. Basically, I am tring to help student to...

Lessons by webcam Face to face lessons Approved profile
at his home at your home By webcam
1 hour £25 £30 £25
5 hours £22 £47 £125
10 hours £20 £70 £250
Book a class