Few Major Points:
1- Design Course Content, Material and Books after critical thinking and research.
2- The course is totally innovative ie how to implement theoretical knowledge into practical experimental work.
3- Course include, small assignments, quizzes, exams, projects and presentation.
4- Aim of the course to prepare students for future challenges.
I am Mechanical Engineering. I had done my MSc Mechanical Engineering from Northumbria University England with Distinction in June 2016. I got two years and 2 months academic experience of teaching key mechanical subjects to students of mechanical engineering. I am highly professional and goal oriented person.
Email: (concealed information) OBJECTIVE
I am a highly proficient Mechanical Engineer with a drive to achieve excellence by providing optimum level of technical and managerial services with consistent quality improvements and exceeding goals. Ready to take-up any challenging task by utilizing my time and resource management skills along with technical creativity and proactive approach in order to be the leading part of an organization.
MSc Mechanical Engineering (2015-2016)
Northumbria University Newcastle upon Tyne and Wear England
BSc Mechanical Engineering(2014)
University of Engineering and Technology Peshawar
FSC ( Pre-Engineering) (2010)
O.P.F Boys College H-8/4 Islamabad / FBISE Islamabad
O levels/ Equivalence (2006-2007)
O.P.F Boys College H-8/4 Islamabad Cambridge Examination.
WORK EXPERIENCE AND RESEARCH PROJECTS
1. Currently Working as Lecturer in Department of Mechanical and Aerospace Engineering Air University Islamabad since 11th September 2017. Few responsibilities are listed below
Teaching Subjects of Thermodynamics II and Refrigeration and Air Conditioning. Deputy Superintendent Examination.
Advisor for students.
Supervising Final Year Projects in the field of thermodynamics, Heat and Mass Transfer Combustion and Exhaust Analysis of CI and SI Engines. I am also working on project planning, proposal making and performing experimental analysis to check the impact of turbocharging on the performance of "Mushshak Air Craft Lycoming engine” in partnership with Air University Islamabad and Pakistan Aeronautical Complex
2. Lecturer Mechanical Engineering Department Wah Engineering College, University of Wah from 19th September 2016 to 9th September 2017. Few duties that I had performed as lecturer.
Coordinator Mechanical Engineering Department.
Subject Taught: Manufacturing, Machine Design
Conducting Manufacturing Lab, In-charge Manufacturing Lab.
Supervised Final Project on Emission Analysis of Ethanol Blended Gasoline Engine using Engine Test Bed.
Being member of ORIC, CPD Activities, Course curriculum and Course Coding.
3. Worked as Trainee Mechanical Engineer at a National Level Non-Profit Organization Community Uplift Program Pakistan from 31 July 2014 to 01 December 2014. Worked in highly professional and technical environment on project related to installation of small Hydel Power plant.
4. Internee at Oil and Gas Development Company Ltd. (OGDCL) at Dhakni Plant from July 2012 to September 2012. During this period different sections were covered including safety, maintenance and overall processing of the plant.
MSc Mechanical Engineering Research Project: Feasibility Study and Numerical Analysis of Ethanol-Blended Gasoline Engine.
The purpose of this research work was to analyze the effect of different ethanol-gasoline mixtures E0 (100% gasoline), E10 (10% ethanol and 90% gasoline) and E20 (20% ethanol and 80% gasoline), ignition timing and engine speed on the performance and emission characteristics of single cylinder spark ignition engine. The study is based on CFD analysis of the spark ignition engine using Star-CD and ES-ICE packages. In the start model design is generated and then the simulation is run using Pro-Star to investigate the effect of different operating parameters on the performance and emissions characteristics of the engine. The effect of various ethanol blends E0, E10 and E20, ignition timing and engine speed is investigated and results are recorded and discussed to find best optimum operating conditions.
Final Year Project BSc Mechanical Engineering:
My final year project was about Evaluation and Comparison of Carburetor and EFI system & Improvement of EFI System for Small engine plus our second group worked on designing and fabrication of smart car and breaking system. We worked together in two groups for “Fuel Efficient Smart Intelligent Car”. We were qualified for Shell Eco Marathon Philippine Manila 2014 in urban category.
Aero-foil design mesh generation and FEM Analysis, Computer Aided design mesh generation and FEA Analysis of Heat Sink, Design and Optimization of Heat Sink using GA coding Mat-lab, Computer Aided design mesh generation and FEA Analysis of body of Air Cooler, Material Testing and Analysis, Fatigue testing of Materials, Design and Fabrication of Fuel System of the Car.
RESEARCH ACTIVITY Attended 24th World Congress on Engineering (WCE 2016) organized by the International Association of Engineers (IAENG), a non-profit international association for the engineers and the computer scientists in Imperial College London from 29th June 2016 to 1st July 2016.
Computational Thermo Fluids , Internal Combustion Engine, Power Plants, Thermodynamics, Engineering Design and Optimization, Product Design and Development, Manufacturing, Advanced Stress and
Structural Analyses, Engineering Research and Project Management, Solid Mechanics, Machine Design and Advanced Dynamics and Vibration Systems.
TECHNICAL PROFICIENCIES AND SPECIAL SKILLS
Proficient in computer applications MS Office, Internet etc.
Highly responsible and enthusiastic in working.
Proficient in public dealing.
Star CD, Star CCM+, ES-ICE and Pro-Star
Finite Element Analysis
MAT-LAB (GA Coding)
Solid Works (Test Bench) EXTRA-CURRICULAR
President Literary and Debating Society UET Peshawar.
Minister for Sports, Tourism and Youth Affairs at National Youth Assembly.
Performed in Sports and Dramatics competitions.
University representative on electronic media.
Interviewed by many newspaper in Peshawar.
Had organized many events like space week, DICE, HEC Debates, Kaawish on National level.
Had done few programs on Radio Pakistan and with TV channels
AWARDS AND APPRECIATIONS
Got Position in Final Year Project Exhibition as “Green Project”.
Qualified for Shell Eco Marathon Philippines Manila 2014.
Received an appreciation shield from Government of KPK in Peshawar Youth Conference 2014. First ever biggest conference of the region.
Got First position in Technical Presentation in event Step up Youth in UET Peshawar.
Appreciation Certificate from National Youth Assembly for my work.
Was Runner Up in Model Competition in KAAWISH 2014.
Got best leader certificate and award in event KAAWISH 2013 in UET Peshaw
maths lessons closeby? Here's a selection of tutor listings that you can check out.
Superprof can also suggest physics lessons to help you.
Learning isn't a problem, chemistry lessons for all!
Taking thermodynamics lessons has never been easier: you're going to learn new skills.
|at his home||at your home||By webcam|
|1 hour||Not available||£12||£10|
|5 hours||Not available||£24||£50|
|10 hours||Not available||£38||£100|